Strength test bench for connecting device of removable seat and sleeping pocket
Make it clear:
one. It is used to measure the locking strength and durability of the connecting device of the tested object after the child stroller is turned over at a certain Angle under a certain load.
two. Test principle: GB 14748-2006 5.15
Three. Test method:
1. Assemble and disassemble the sleeping pocket or seat pocket and the frame 200 times;
2. Fix the weight A or B near the center of the sleeping pocket or seat pocket;
3. Slowly turn the trolley with the test weight clockwise until it reaches a 100° Angle with the horizontal plane, so that the force of the connecting device fully acts on the frame;
4. Rotate counterclockwise.
Iv. Equipment details:
² One host
² One control cabinet
² Model two
² One copy of instructions
One certificate of qualification
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.