Wheelchairs series

PLC control chair drop fatigue testing machine WSD-8603

A test principle: simulate the situation that the wheelchair will fall freely after passing the obstacle. After a certain number of loads, it is detected for damage. Provide test data for manufacturers to evaluate the advantages and disadvantages of products and technical improvements.

two. According to standard: ISO 7176-8, GB/T 18029.8

Three test methods:

1. It can make the wheelchair fall from a height of 50mm±5mm to a rigid horizontal test plate;

2. The wheel of the wheelchair can be rotated to avoid the impact of each falling wheel on the same part;

Four... Technical parameters:

1. Free fall height: 50±5 mm

2. The Angle of each impact wheel can be changed: ≥10°

3. Test times: 0-9999 times can be set, automatically retain the test results

4. Test steel plate: 2mm stainless steel plate

5. Lift and drop mode: pneumatic automatic

6. Control mode: PLC and touch screen control

7. Display mode: full color LCD touch screen

8. Data storage: PLC memory

9. Brand of cylinder and other pneumatic components: AirTAC

10. Power supply: 220V 5A

11. Air source: air pressure 0.6MPa

12. The main body of the machine is aluminum alloy profile, beautiful and generous.

13. The base of the machine is solid steel with good stability, equipped with reinforcing bars and flat feet for water transfer.

Machine appearance electrostatic spraying, other parts electroplating treatment, high rust prevention ability, beautiful appearance.