Office chair reciprocating impact testing machine

Office chair reciprocating impact testing machine WSD-8605

I. Test scope:

To simulate the actual use of the user, the sample is subjected to reciprocating or single free fall impact action with a certain weight sandbag, and whether the specimen is damaged after impact is checked, so as to judge the ability of the specimen to withstand fatigue stress and wear.

Applicable standards: ANSI/BIFMAX5.1-2002 QB/T2280-2007, ENV581-2--2000

3. Basic requirements

1. The equipment fully meets the test conditions, methods and functions specified in the relevant provisions of ANSI/BIFMAX5.1-2002 standard.

2. The device can set the number of tests specified in the standard and the function of setting the number of tests by itself, and can directly display the number of tests digitally in real time.

3. When the test ends or the specimen is damaged, the test will be automatically stopped and the test results will be retained.

4. Full color LCD touch screen Chinese display, touch screen Settings

4. Technical requirements

1. The maximum load that the electric suction iron can absorb: 200KG

2. Moving beam up and down movable stroke: 700mm

3. Cylinder specification: ¢80x300

4. Reciprocating test speed: 10~30 times/min can be set arbitrarily

5. Intermittent test time: 0~99 seconds adjustable

6. Test times: 0-999,999 times can be set arbitrarily

7. Control mode: PLC control

8. Display mode: full color LCD touch screen

9. Data storage: computer memory and U disk

10. Report generation method: The data can be automatically printed on the ordinary computer through the U disk and the test report

11. Brand of cylinder and other pneumatic components: festo

12. Stop mode: Automatically stop when the set number of tests is reached, the specimen is damaged or the deformation is too large

13. Impact height position sensor: 4

14. Beam up and down adjustment mode: electric adjustment.

15. 2 percussion canvas sandbags are provided

16. The main body of the machine is steel component, high strength, not easy to deformation.

17. The base of the machine is solid steel with good stability, equipped with reinforcing bars and flat feet for water transfer.

18. Electrostatic spraying of machine appearance, electroplating of other parts, high rust prevention ability, beautiful appearance.

19. Use gas pressure: 6 KG/CM2

20. Power supply: 220V 50HZ 800w