PLC control bicycle static force comprehensive testing machine

PLC control bicycle static force comprehensive testing machine (universal testing machine) WD-8304

Instructions:

1. Use: Test whether the parts of the bicycle are damaged when a certain loading force or torque is applied. And the size of deformation can be displayed in real time.

2. The advantages over the current similar testing machine are as follows:

1. For the bicycle industry unique width and height design, so that a variety of static tests of bicycles can be conveniently realized on this machine.

2. More simple operation, fully realize automatic control of the machine, automatic rise, automatic fall.

Iii. Performance:

1. Load element resolution: 1/10000

2. Precision of load element: ≤±0.3%

3. Load cell capacity: 2T

4. Travel: 1000mm

5. Machine lifting speed: 0-200mm /min can be set

6. Pull the pressure test automatically reverse

7. Motor: Taiwan Dongyuan inverter motor

8. Other electrical appliances: Omron and Taiwan Shilin

9. Reducer: Taiwan Chengda or Jie brand

10. Lead screw: T-type lead screw drive

11. Base plate adopts T-type test platform: convenient to install various test fixtures

12. Breakpoint stop: When the test part breaks or the test value exceeds the set range of change, the motor automatically stops the brake, and it is not necessary to press stop again to protect the machine.

13. Dust jacket: the guide screw has a dust proof device to prevent flying dust and test objects from running into the guide screw, increase the life and accuracy of the instrument, beautiful instrument and other functions.

14. Upper limit and lower limit micro device: when the upper cross bar reaches the highest point and the lowest point, the micro switch automatically turns off the power, protects the load element, the motor, and can avoid the improper use of the operator, resulting in damage to the instrument.

15. Speed: stepless speed regulation

16. Power supply: 220V 50Hz

17. Test space: up and down 1000mm double screw, center distance ≥450mm.

18. Fixture: a set of saddle pulling force fixture, a set of chain pulling force fixture.

19. Hardness of all fixtures after heat treatment: HRC 45-50.

Four. Equipment details:

One PLC control box

sensor

Four dust cover

A copy of instructions

One certificate of qualification

One copy of warranty card