PLC control of dual-station shock absorber fatigue testing machine WSD-8756A
one. Used to simulate the use of shock absorber and spring; The shock absorber is fixed on the special fixture, after adjusting the offset, after the set number of tests, check whether the function of the shock absorber is lost, and whether the shape is damaged.
two. Functions and main parameters:
1. Maximum test force of each specimen: 200kg
2. Control mode: Delta PLC control
3. Display mode: Delta 7 inch LCD touch screen
4. Number of tests: 2 shock absorbers can be tested at the same time (general purpose shock absorbers before and after)
5. Maximum travel: 60 mm
6. Test frequency: 2-3HZ adjustable
7. Position display: scale display directly
8. Display accuracy: 1mm
9. Micro switch: With safety micro switch, when the test object is broken and damaged, it will automatically stop.
10. Counter: 0-999,999 automatic counting. The number of times reached automatic stop.
11. Power source: variable frequency motor
12. Stop: reach the number of times or the specimen halfway damaged, automatic stop, and retain the number of tests.
13. Micro switch: with a safety micro switch, when the test object is damaged, the automatic shutdown facility.
14. Protective cover: the upper part uses sheet metal packaging, one side opens the door, leaving a transparent observation window
15. The main body of the machine is a shaped steel component with good stability, equipped with reinforcing bars and flat feet for water transfer.
16. Electrostatic spraying of machine appearance, electroplating of other parts, high rust prevention ability, beautiful appearance.
17. 2 500kg sensors, display the load force value
Three. Equipment details:
² One host
² One electric control box
² Micro switch and accessories
² One certificate of qualification
² One copy of instructions
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.