PLC control wheel impact testing machine WSD-8715B
First, the test principle: detect the impact resistance of the wheel hub
2. According to the standard:
QC/T211-1996 "Test method for light alloy wheels of Motorcycles and mopeds"
GB/T22435-2008 "Motorcycle and Moped Light Alloy Wheels"
Iso 8644-2006 "Motorcycles - Light alloy wheels - Test methods"
JASOT203-2005 motorcycle light alloy wheels
DB32/T1917-2011 (Test method for Radial Impact of Whole electric Bicycle Wheels)
Three, the main technical parameters:
1. Impact height: 0-600mm (except specimen)
2. Maximum impact weight: 190Kg (adjustable)
3. Equipped with weights: 20kg×4, 10kg×1
4. The impact hammer test width is greater than 200mm
5. Can test the outside diameter of the wheel after installing the tire: Φ260 ~ Φ770mm
6. Height of wheel mounting bracket: 400mm
7. The mounting width of wheel mounting bracket can be adjusted: ≥250mm
8.
9. Loading mode: electric loading
10. Motor reducer brand: Polis
11. Lifting speed: 0-300mm/min adjustable
12. Impact mode: direct hammer impact, single hammer impact
13. Equipped with fixture: electric vehicle, electric motorcycle set fixture
14. Number of tests: 0-999,999 times can be set
15. Control mode: PLC control
16. Display mode: 7-inch full-color LCD touch screen
17. Power supply: 220V 50Hz 1KW
18. The main body of the machine is steel component, high strength, not easy to deformation.
19. The base of the machine is solid steel with good stability, equipped with reinforcing bars and flat feet for water transfer.
20. Electrostatic spraying of machine appearance, electroplating of other parts, high rust prevention ability, beautiful appearance.
21. The outer side of the machine is equipped with a protective net safety door, the height of the protective net is 1000mm, and there is a mechanical locking device
Seven, equipment details:
² One host
² One electric control box
² One copy of instructions
² One certificate of qualification
² One warranty card
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.