PLC control pedal impact testing machine

PLC control pedal impact testing machine WSD-8715

one. This machine is used to simulate the phenomenon that the frame and front fork will be affected by a certain size of impact when the bicycle is riding, and test the impact resistance of the frame and front fork.

two. Test principle: GB3565 ISO 4210

Three types can be tested:

1) Impact strength test of bicycle frame front fork assembly

2) Impact strength test of pedal shaft

Four. Test method:

1) According to the different specimens, select the matching fixture to install the specimens

2) Adjust the weight of the required impact weight;

3) Set the impact height required for the test on the touch screen

4) After the completion of the test, check whether the assembly has cracks and the size of the deformation amount, and judge whether it is qualified according to the standard.

Five. Technical parameters:

1) The weight of the weight can be adjusted to meet the requirements of the following test

Impact strength test of front fork assembly of impact frame: 22.5kg

Impact strength test of pedal shaft: 15kg

2) Impact height: can be freely set within the equipment test range

3) Maximum test distance: 1600mm (distance from rear axle to lower surface of impact weight)

4) Weight lifting speed: 500mm/min

5) Height measurement error: ±1mm

6) Weight accuracy: ±1%

7) Weight lifting drive motor: AC motor

8) Control mode: PLC and touch screen control.

9) Display mode: full color LCD touch screen

10) Sheet metal protection on the left and right sides of the machine and the back three sides

Six. Equipment details:

² One host

² One control cabinet

² A set of standard weights (complete according to standard test methods)

² One copy of instructions

² One certificate of qualification

² One warranty card