Scooter bottom impact testing machine

Scooter floor impact testing machine WSD-8413

one. Scope of use

This machine is used to simulate the situation of the user of the scooter when riding, and evaluate the ability of the bottom plate to withstand the impact of the user's weight.

two. Test basis: EN 14619:2004 5.5

Three. Test method:

1) During the test, the front and rear wheels of the scooter are fixed on the test machine according to the method specified in the standard.

2) Adjust the state of each component of the scooter, so that the state of the frame is the same as the actual riding; Align the impact block with the center of the scooter floor.

3) Fix each adjustable part of the scooter to prevent loosening during the test and affect the test.

4) Set the impact height required by the test on the touch screen.

5) Start the test procedure and start the test.

6) After the test is completed, check whether the scooter has cracks and deformation, and judge whether it is qualified according to the standard.

Four. Technical parameters:

1) Impact weight: 20kg

2) Impact weight diameter 100mm

3) The bottom plate of the impact weight is glued to a rubber block with a thickness of 17mm and a hardness of 70° Shore.

5) The impact guide tube can move up and down; 300mm

6) Maximum impact height: 400mm

7) Height measurement error: ±1mm

8) Weight accuracy: ±1%

9) Control mode: automatic control.

10) Display mode: digital display

Five. Equipment details:

² One host

² One set of impact weights (complete according to test standards)

² One copy of instructions

² One certificate of qualification