Scooter front wheel impact testing machine

Scooter front wheel impact testing machine WSD-8412

one. Scope of use

The machine is used to simulate the condition of the front wheel of the scooter when it encounters obstacles during riding, and evaluate the ability of the front wheel to withstand the impact of obstacles on the ground.

two. Test basis: EN 14619:2004 5.6

Three. Test method:

1) During the test, the rear wheel of the scooter is fixed on the test machine in accordance with the standard method.

2) The scooter handle is fixed on the special fixture, and the state of each component of the scooter is adjusted, so that the state of the frame is the same as the actual riding; The front of the wheel is aligned under the impact block.

3) Fix each adjustable part of the scooter to prevent loosening during the test and affect the test.

4) Set the impact energy required by the test on the touch screen.

5) Start the test procedure and start the test.

6) After the test is completed, check whether the scooter has cracks and deformation, and judge whether it is qualified according to the standard

Four. Technical parameters:

1) Impact weight: 135N, 20kg

2) Impact energy: 135J

3) Impact height: 1M

4)

Final impact velocity: (4.5±0.5) m/S

5) Weight lifting speed: 1m/min

6) Maximum impact height: 1.2M

7) Height measurement error: ±1mm

8) Weight accuracy: ±1%

9) Control mode: PLC and touch screen control.

10) Display mode: full color LCD touch screen

Five. Equipment details:

² One host

² One set of impact weights (complete according to test standards)

² One copy of instructions

² One certificate of qualification